Forklift Attachments > Spreader Beams
The spreader beam is designed to allow carrying of a uniform, wide load by a forklift. The load carried should be evenly distributed over the four forks of the spreader beam.
The spreader beam slides over the standard forks fitted to the forklift until the retention pins can be positively locked into place.
The maximum load length permitted, is the length of the spreader beam plus 40%. The lost load on all beams is 150mm.
The maximum parent fork tine dimensions for an SB2 spreader are 134 x 69 mm.
The maximum parent fork tine dimensions for an SB3 spreader are 152 x 69 mm.
The standard finish applied to the product is ‘safety yellow’ enamel paint.
Structural design and material selection for this attachment is in accordance with AS2359.1.
Welded fabrication of this product is in accordance with AS1554.1 SP.

PART NUMBER | MASS Kg | PRODUCT DIMENSIONS WxDxH | CENTRE OF GRAVITY | S.W.L. CAPACITY |
---|---|---|---|---|
FF-SB2-3000 | 288 | 3000 x 2060 x 1040 mm | Hor.615 - Vert.40 mm | 3000 Kg @ 600mm & 2000 Kg @ 900mm |
FF-SB2-4000 | 341 | 4000 x 2060 x 1040 mm | Hor.535 - Vert.83 mm | 3000 Kg @ 600mm & 2000 Kg @ 900mm |
FF-SB2-5000 | 374 | 5000 x 2060 x 1040 mm | Hor.496 - Vert.87 mm | 3000 Kg @ 600mm & 2000 Kg @ 900mm |
FF-SB3-3000 | 323 | 3000 x 2060 x 1040 mm | Hor.650 - Vert.32 mm | 5000 Kg @ 600mm & 3300 Kg @ 900mm |
FF-SB3-4000 | 376 | 4000 x 2060 x 1040 mm | Hor.573 - Vert.72 mm | 5000 Kg @ 600mm & 3300 Kg @ 900mm |
FF-SB3-5000 | 422 | 5000 x 2060 x 1040 mm | Hor.519 - Vert.72 mm | 5000 Kg @ 600mm & 3300 Kg @ 900mm |
FF-SB3-6000 | 482 | 6000 x 2073 x 1040 mm | Hor.466 - Vert.95 mm | 5000 Kg @ 600mm & 3300 Kg @ 900mm |